Installing an Infrared Remote Control on the IR100: Revision history

Jump to navigation Jump to search

Diff selection: Mark the radio buttons of the revisions to compare and hit enter or the button at the bottom.
Legend: (cur) = difference with latest revision, (prev) = difference with preceding revision, m = minor edit.

8 June 2025

  • curprev 13:4213:42, 8 June 2025 Philipp talk contribs 10,116 bytes −8 No edit summary
  • curprev 12:0312:03, 8 June 2025 Philipp talk contribs 10,124 bytes 0 No edit summary
  • curprev 12:0312:03, 8 June 2025 Philipp talk contribs 10,124 bytes +10,124 Created page with "This applies to all Reciva radios, not just the IR100. For a remote control to work there must be a suitable IR sensor fitted and a lircd configuration file. That's it! === Adding a sensor === For radios that don't already have an IR sensor some hardware modifications will be required to add one in the case where it will be visible. Almost any IR decoder that will run from a 3.3V supply should work, these devices remove the 38kHz carrier and output a logic signal th..."
Retrieved from "https://www.sharpfin.org/index.php?title=Installing_an_Infrared_Remote_Control_on_the_IR100"