|
|
Line 35: |
Line 35: |
| | [[Image:Success.jpg]] | | | [[Image:Success.jpg]] |
| |- | | |- |
| | '''v257-a-865-a-281'''<br/> | | | v257-a-865-a-281<br/> |
| | [[Image:Success.jpg]] | | | [[Image:Success.jpg]] |
| |- | | |- |
Revision as of 22:21, 10 September 2009
Offering hope to all the owners of the discontinued Morphy Richards 27025 sets which are no longer updated, unless you Sharpfin it. Like I did:
Current Devices
Morphy Richards 27025
|
Firmware
|
Hardware replacements and additions
|
Config.txt additions
|
Patches
Patch
|
Status
|
Sharpfin patch
|
|
Firmware
Patch
|
Status
|
v257-a-232
|
|
v257-a-756-a-238
|
|
v257-a-865-a-281
|
|
v257-a-865-a-337 (current)
|
|
|
Added: Edimax EW-7318Ug Wi-Fi USB adaptor. This fixed a problem with the Wi-Fi killing itself during use, as well as 802.11n (like the BT Home Hub) interfering with the default adaptor. Every 27025 owner will probably need to do this. To replace the Wi-Fi adaptor, do the following:
1. Order the Edimax EW-7318Ug Wi-Fi USB adaptor. According to reports, the Edimax EW-7318USg will also work and comes with an antenna which can be stuck out of the blanked USB port.
2. Unplug the radio (safety first!). Unscrew the six screws from the back of the radio.
3. Carefully open up the radio and locate the USB adaptor, in the centre-right of the radio.
4. Carefully prise off the USB adaptor from the radio, which is stuck down by double sided sticky tape and prise the adaptor out of the USB socket.
5. Insert the new adaptor into the USB socket.
6. Close up the radio, put the screws back in and test it.
Added: blu-tack and silver paper to the On/Standby button - to stop the light shining in my eyes (I use the radio in the bedroom). Thankfully newer firmware upgrades will allow the light on the screen to go off if standby level is set to 0.
|
Adds the 'My History' option to the 'My Stuff' menu with a maximum of 20 stations at any time (can be changed). No bugs spotted:
Option:
stations-history
on
Option:
history-size
20
Adds a 'Search' option to the 'Stations' menu. No bugs spotted:
Option:
stations-substring-search
on
Forces station information, such as artist name, track name and so forth to scroll across the screen:
Option:
force-metadata
on
Adds a 'Deemphasis' option to the 'Configure' menu. Selecting the 'none' option will make the sound quality far better. You'll have to reselect the none option if you factory reset the radio:
Option:
deemphasis-menu
on
Option:
deemphasis-menu-values
0 44100
|
|
Former Devices
Logik IR100
|
The buzzing of the speaker, even after an fix, was too much. Replaced with current Morphy Richards 27025.
|